#Ethernet status down drivers#
#Ethernet status down series#

#Ethernet status down series#

The Card Status Query message is obtained when the IPN Series 2 card comes into service after reset. The Card Status Query message response is obtained from the CSP when the host sends a Card Status Query message. They will also be reported in the Card Status Report (0x00A6) message whenever the card comes in service after a reset. They however were still stuck at 100mbps.

#Ethernet status down drivers#

I set them up with a new Windows 10 PC and all drivers up to date.

(it needed to be upgraded to windows 10 anyway) The odd thing was the even the gig compatible USB to Ethernet adapter ran at 100mbps. To enable this new feature youll need your VIO clients to run either AIX. So I put in a USB to Ethernet adapter to hold them off while I set up a replacement PC. These are reported in the Card Query response. If the VIOS is down, the VIO client times out and sets the uplink status to down. This feature queries the individual Ethernet link status, speed and duplex type for the IPN Series 2 card using the Card Query message (0x0083). When the Ethernet link comes back up, an Alarm Clear message is sent. whenever the Ethernet link goes down, an Alarm message is sent to the host. I suspect that if someone physically checks the connection that they will find that the interface is not connected to a switch or anything. Based on that status, appropriate actions could be taken like taking all the channels OOS in that card. In my experience when a cable is not plugged in the Ethernet/Fast Ethernet will show to be line up line protocol down, which is the exact symptom that you report. When restarting the host application or initiating a new host application, the Ethernet port status needs to be known.

speed and duplex type of the NET1, NET2 and NET3 ports located on the Multi-Function Media I/O card.This feature allows the host to query the following on the IP Network Interface Series 2 card at any time: Querying the Ethernet Link Status, Duplex Type and Speed Need help in connecting second pc to router using ethernet (Cat6) cable.You are here: CSP Developer’s Guide: Internet Protocol > 3 IP Network Interface Series 2 Card > Querying the Ethernet Link Status, Duplex Type and Speed Question Lost/Late Packets & High Network Jitter/Ping Maxes for Months. Question Intel(R) Ethernet Connection (14) I219-V Sorry I forgot to mention some things, it happened a few months ago and it was out of my head until you mentioned itĭo you think that an USB ethernet adapter could solve the problem? I also bought a new box at that time, thinking that the problem was coming from there, without result either. I also forgot to mention that at the time I had the first OS I bought and tried another ethernet cable to see if it was coming from there without result. I also tried to switch the ports of the box without result Click to expand.Something I should have mentioned is that I had two installations of Windows on this computer, and the second installation was on an SSD from another PC that I just plugged into this one by removing the hard drive that contained the first OS, yet both Windows installations had the connection problem.ġst Windows: installed on the computer when I received it, and it is on this OS that I saw that there was a connection problemĢnd Windows: installed on a computer without problem then moved on the computer whose connection is broken by removing at the same time the disk containing the first Windows, the two Windows never cohabited yet there was still the problem